Isotherm Roof Insulation

Posted by Doors and Improvements on January 11, 2015
Doors and Home Improvement / No Comments
Isotherm Roof Insulation

Isotherm Roof Insulation

Polyester Isotherm Insulation is a safe, itch free and non toxic fiber due to its non hazardous properties. Although lightweight with high tensile strength, polyester is durable and resistant to most chemicals, mildew, shrinking and stretching. Naturally hydrophobic and fast drying, it means that this material is water resistant and it is not affected by moisture.

Polyester Isotherm insulation products do not contain raw materials that have chloride compounds. Chloride compounds are also not used in the insulation manufacturing process. There are no other corrosive chemicals that are used at any stage of the manufacturing process of insulation or raw materials.

20141216_123435

 Isotherm Eco friendly Insulation

Isotherm is an eco friendly insulation for roofs. Polyester is easy to recycle time and again as this process does not need large amount of heat compared to other products. The overall saving that is associated with recycled polyester has a positive impact on the environment. This is the reason why this material is ideal for manufacturing insulation. There are different types of roof insulation made from isotherm insulation and acoustic.

Isotherm Polyester Insulation

Polyester has non allergic properties and it is safe for people who suffer from asthma. This insulation product does not have binders that may deteriorate and then crumble with time or use brittle or short fibers that are prone to breakage. This therefore shows that this product does not have the potential to create dust due to fibers or other debris working their way through lighting and air conditioning ventilations in the ceiling. Polyester is a type of insulation that is actually recommended by most asthma foundations for low allergens or asthma friendly buildings.

Polyester insulation has a very long life span and it is not going to change or degrade in any way overtime. This means that you are going to get value for your money. Although you might have to spend a bit more for the insulation of this material, the fact that it has a long life span means that you will save on energy with time.

Polyester fibers are made from synthetic polymers that are referred to as polyethylene terephthalate chemical substance which is found in petroleum. The strong and light weight fibers are soft to handle which makes it easy for installation in walls, ceiling and between floors of timber framed construction.

Allergy benefits with Isotherm

As seen above, those are some of the benefits that one stands to gain by using polyester insulation. If you have someone in your family that is suffering from asthma or any other breathing condition, this is the most ideal insulation to consider. You do not want a product that is going to make their condition a lot worse than it already it. With all this in mind, polyester is the best roof insulation product.

Tags: , , , ,

Isotherm manufactured from Plastic Bottle Pollution

Posted by Doors and Improvements on January 11, 2015
Doors and Home Improvement / No Comments
Isotherm manufactured from Plastic Bottle Polution

The effects of plastic products on the environment are highly detrimental. It is estimated that about 10 metric tons of plastic products are washed away into the Pacific Ocean each day from Los Angeles. As plastic is non-degradable, many toxins such as bisphenol A and polystyrene are released from plastics into the ocean causing water pollution. These toxins are poisonous to marine life and disturb the natural ecosystem.

Plastic also releases many dangerous products into the soil. It seeps into and pollutes the land water. Animals and humans who drink this water are highly affected by the chemicals in it. Some animals ingest these plastic products. When this happens, these products coagulate their digestive tract and adversely affect humans who eat these animals. When a species ingest a plastic product, it gets entangled and it is very difficult for it to find food. In this way, the survival of these species becomes endangered.

Isotherm manufactured from Plastic Bottle Polution

 Tackling plastic bottle pollution

Despite the ever increasing environmental effects of plastic pollution, only around 27% of plastic bottles are recycled.

 Some of the steps that can be taken to reduce this pollution are:

  1. Quit utilizing bottled water –it is no more secure than faucet water and costs more than faucet water.
  2. Bring your own reusable basic supply packs with you when you go to the store.
  3. Utilize a refillable gadget for your hand cleanser and dish washing fluid; one expansive container is better than using a bundle of little ones.
  4. Use reusable holders rather than sandwich packs.
  5. Bring your own to-go cup with you to the coffeehouse.
  6. Download songs from the internet as opposed to purchasing CD’s.
  7. Say no to single serving bundling, purchase in mass and offer with your relatives and companions.
  8. Use silver utensils rather than plastic ones, keep a set at the workplace, and bring a set on an outing or to the shoreline
  9. Search out things that are not made of plastic.
  10. Don’t use those plastics that are not promptly recyclable.
  11. Don’t use plastic straws. These are among the most thrown away things by people. The alternative is to use custom made plastic straws, which are eco-friendly or you can also use plastic and metal straws. The latter are more beneficial and can be used again and again.
  12. You should immediately stop using gum. It is synthetically made from plastic and creates immense detrimental environmental impacts. The benefits of avoiding are twofold. You remain safe from poisonous chemicals that are released from it and you help in preventing further pollution.

Recycling plastic

Recycling plastic can often generate different useful products, including shampoo bottles, film and sheeting, traffic cones, packing and insulating materials, trash bags, carpets, kitchenware and several others. Some products for daily use that are manufactured from plastic include wallets, bags, iPad and cell phone covers, surf pack, kitchen towels, bottle openers etc.

Therefore the environmental impact of plastics can greatly be reduced through recycling and environmental conscious buying decisions.

Isotherm Roof Insulation

Isotherm is manufactured from recycled plastic bottles is regarded as one of the most Eco friendly Roof insulation products on the market. A polyester base insulation that has great R-value as an Insulation giving the product one of the best thermal insulation properties for roofs. Isotherm roof insulation is a dust free polyester insulation Read more

Tags: , , ,

Pet Doors

Posted by Doors and Improvements on January 11, 2015
Doors and Home Improvement / No Comments

Pet Doors

Pet dogs and cats are already considered by many people as a part of their family. They give them special treatment just as they treat their own children. While these pets stay inside the house most of the time, homeowners still see to it that their pets have a schedule to follow for their regular time to urinate and to defecate. This schedule is not a problem if the homeowner is always at home because he can just let his pet go out for a pee or defecate. However, there are also instances when you’re not at home, your pets can either be inside the house and they want to go out for their personal necessities or they’re out of the house and they want to get inside. These instances can give your neighbors problems because your pets will most likely be very noisy. What could be worse here is what you’ll see inside your house by the time you get home. read more on pet doors 

 

All of these problems can be avoided if you provide or make a pet door for your pets it also reduces the amount of cold air coming into the home in winter. The pet doors can save you the burden of worrying over the schedule of your pets to go out of the house for their scheduled toilet activities. The pet doors can also give your cats and dogs free access to enter and get inside your house on their own free will. You will no longer hear your cats and dogs whining or scratching at the door because they want to get in or out of the house.

 

The pet doors can also save you the burden of cleaning your pet’s unwanted toilet activities like spoiling or messing up your carpets and upholsterers after failing to do it outside the house.

Tags: , , , ,

How to Beat the Summer Heat

Posted by Doors and Improvements on December 27, 2014
Doors and Home Improvement, Uncategorized / No Comments
Aerolite

Summer heat can be a killer especially in coastal towns and villages with high humidity. While visiting in South Africa recently and feeling the effects of 44 deg.C it felt as though we were melting. Visiting some friends and feeling the cool home it struck me that insulation in Africa is now a reality. All new homes being built must now comply with South African building legislation or SANS

Why has the legislation come into effect in South Africa

With an energy crisis hammering the South African consumers with what the call LOAD SHEDDING to help their main energy supplier Escom cope with the shortage of energy the country faces. Escom is the South African sole supplier of energy and they unfortunately are facing problems keeping up with the demand.

 

Home owners are now Installing products like AEROLITE INSULATION as well as ISOTHERM INSULATION into their homes to reduce the temperature inside the home and reduce the prospect of using the energy consuming Air conditioner. Ceiling Insulation will reduce the prospect of heat gain through the roof area by as much as 85%. This can reduce the temperature in the home by as much as 6 to 8 deg. C. One of the specialists that are involved in Insulating homes in South Africa for more than 25 years are leading Insulation installers in South Africa visit their website for more info

 

Roof Insulation has many benefits, from reducing noise levels to improving temperature as well as saving money.

 

Tags: , ,

4 Effects of Ceiling Insulation on Indoor Comfort

Posted by Petdoor 4less on December 18, 2014
Doors and Home Improvement / No Comments
ceiling insulation

Being comfortable in your own home is something which is extremely important. Choosing to insulate your house can make a huge difference in the overall comfort that you feel. Insulating your whole house is the best way to go but even just adding ceiling insulation will have you seeing dramatic differences. By adding insulation, you will help keep your home cool in summer and warm in winter, plus it will also help to soundproof your home and save you when it comes to paying the bills.read our latest blog post to get updates. Paper or blown in type insulation products are also great but have their issues when it comes to long term fire rating and absorbing water in the roof space. This can cause problems were homes in some countries have rhino board type ceilings.

Cool in Summer

Keeping your home cool in summer is a huge factor when it comes to indoor comfort. No one wants to dread going home because their house is too hot. If you don’t have an air conditioner, then this could be a problem you’re faced with each and every summer. While not as effective as air conditioning, having ceiling insulation can make a difference in the overall temperature of your home and you will find once it’s installed your house won’t be as hot as it was before. If you do have air conditioning, without insulation you will find that in summer you need to run it all the time. Living you’re life in air conditioning is not good for you, so having insulation and not having to use it as much is great for your health.

Warm in Winter

By installing roof insulation in you will help to keep your home warmer in winter. Without insulation your house will lose a lot of heat meaning you either have to cover up more or use heating appliances. If you use a fire in your house during the cold winter months this can be time consuming, messy and also dangerous. Other types of heaters can also malfunction and start fires and in extreme cases have even caused deaths. With fires you need to either cut or purchase firewood and ensure that you keep the fire stoked so that it doesn’t go out. Fires can also be messy as sparks and small pieces of wood can get out and ruin floors and carpets and also pose a fire risk. If you install insulation to keep you home warm you will reduce how often you need to use your fire or other heating appliance saving you time and potential risks.check more information from http://www.roofinsulation.biz/ceiling-insulation/

Soundproofing

Having roof insulation can also help to soundproof your home. If you have a metal roof then the noise from rain and wind can sometimes become deafening. There is nothing worse than just settling into your favourite program or having a conversation only to have it drowned out by a storm. Insulation in your roof will reduce the noise that you hear from rain and wind so that you can enjoy your program or conversation in comfort without being drowned out.

Electricity Cost

ceiling insulation

By keeping your house cool in summer and warm in winter with ceiling insulation you will also help to reduce your electricity costs. Air Conditioners and Heaters use a lot of power and can add a fortune to your electricity bill. If you don’t need to use them as frequently due to having insulation you will be able to cut the cost of your bill dramatically.

There are a number of reasons you should install roof insulation in your home to help keep yourself comfortable. It will keep help to regulate the temperature meaning your house is cooler in summer and warmer in winter. It will also help to keep out unwanted noises and save your money on your power bill.

Tags: , ,

What’s the best Ceiling Insulation?

Posted by Petdoor 4less on December 18, 2014
Doors and Home Improvement / No Comments
insulation

There are lots of things that you need to consider when choosing ceiling insulation as there are a lot of different varieties available to you. It can be hard to know which one is best for your specific needs. There is closed-cell foam, open-cell foam, loose-fill cellulose and batt. The best type of insulation can vary depending on what your specific needs are.

Closed-cell foam and open-cell foam

This type of insulation is a foam which is sprayed on surface to stop heat and cold getting through and comes in closed-cell and open-cell. Closed-cell is perfect for almost anywhere that you wish to insulate, where open-cell is effective in walls and any other moisture-free areas. Closed-cell insulation is perfect for tight spaces and areas which aren’t vented. This type of ceiling insulation is not a good fit if you will be installing it near water tanks, fireplaces or furnaces as it is highly flammable and open-cell shouldn’t be installed anywhere that is prone to leaks. It is also a more costly option as it must be installed by a professional.check more detailed information at http://www.petdoor-4less.com/4-effects-of-ceiling-insulation-on-indoor-comfort/

Loose-fill Cellulose

Loose fill insulation is perfect for walls and attics as it is a loose insulation which is blown into your attic or wall cavity. It’s not an expensive insulation and is easy to install. If it’s not possible to get into the area you wish to insulate a hole can be drilled and the insulation can be blown into the cavity through this hole. This product however, is not suitable if you have concrete or stone walls or if you ceiling isn’t vented as moisture can reduce the effectiveness of the insulation if it gets in. It also needs to be installed by a professional and can be don’t yourself.

Batt

Batt insulation is a great choice if you need to insulate interior walls or if the budget for your roof insulation is low. It’s normally made from fibreglass or mineral material but can also be found in cotton as well. If you choose batt insulation from cotton this will set you back more than the other two types and also isn’t as easy to find. This is the cheapest form of insulation but isn’t easy to cut meaning installation is a little harder than with other types and should be installed by a professional. Again it’s not a good fit for a roof that isn’t vented.

insulation

There isn’t one type of ceiling insulation that is perfect for every ceiling as there are a variety of factors than can influence the type of insulation you choose to use. You need to take into account your budget and whether you want to be able to install the insulation yourself or whether you don’t mind paying for a professional to install it for you. You also need to consider the space that you will be installing it into. If your ceiling may leak you will need to choose an insulation which isn’t affected by moisture and if you have anything that could cause insulation to catch fire choose one which isn’t flammable.view more related information from this source.

Tags: , ,

Why ISOTHERM?

Posted by Petdoor 4less on December 18, 2014
Doors and Home Improvement / No Comments
thermal insulation

Having insulation installed in your home or business is important to help you for a variety of reasons. The most common type of insulation people use is insulation but you can also insulate your walls, geysers, and pipes as well. Choosing to insulate your home with ISOTHERM will help you save electricity and you get to help the environment at the same time too.

Saving Electricity

Having thermal insulation for roofs, walls, pipes and geysers can help to dramatically reduce your electricity bill. Insulation in your home helps to keep your home cool in summer and warm in winter. This means you that in summer you won’t need to run your air conditioner as much and in winter you won’t require as much heating. But cutting down on the use of heating and cooling appliances you will save money on electricity as these appliances use some of the highest amounts of electricity than any other appliance in your home.

Good for the Environment

ISOTHERM products are environmentally friendly as they are made from PET bottles which have been recycled. Their insulation is also not a non-toxic thermally-bonded polyester so aside for being good for the environment it’s good for you as well. Saving Electricity and helping the environment overlap as points why you should choose to insulate your home. If you are using less electricity then you are helping to reduce carbon emissions which are another win for you and the environment.

Easy to Install

You can have someone install your insulation for you or you can choose to install it yourself. If you choose to install it yourself its extremely easy if you follow these simple steps taken from the ISOTHERM website for roof installations:

• Measure the distance between roof beams or roof trusses and then select the most appropriate roll of insulation.
• Cut the insulation to the correct size before entering the roof with a pair of scissors or shears.
• Make sure to avoid walking on ceiling boards and only walk on the crossbeams, truss ties or balancing boards.
• Be sure to place the insulation correctly by placing it in close contact above the ceiling and make sure it fits well between the roof beams and trusses.
• Make sure that there is no gaps by butting the ends of the rolls together or overlapping them to ensure the insulation functions correctly.
• Be sure to allow a 150mm gap around flue pipes, ceiling fans and recessed lights.

thermal insulation
• Wrap the insulation around geysers and water pipes to increase the effectiveness of the insulation.
• Make sure you don’t block any ventilation points with the insulation.
• Use any offcuts you may have to fill in gaps and corners.
• Don’t put insulation in contact with any metal chimney fabrications or flues.
• Remember to insulate under the geyser and above the trap door.

There are many benefits for choosing to insulate your home with ISOTHERM. It’s quick and easy to install and will save you money on your electricity bills. It will keep your home warm in winter and cool in summer and is also environmentally friendly.don’t you know more about ISOTHERM yet? go to http://en.wikipedia.org/wiki/Isotherm for more information.

Tags: , ,

The 3 Most Useful Applications of ISOTHERM

Posted by Petdoor 4less on December 18, 2014
Doors and Home Improvement / No Comments
Roofing Sheets

ISOTHERM is a thermal insulation made from PET bottles which have been recycled. It’s a non-toxic thermally-bonded polyester which makes it great for the environment. ISOTHERM is perfect for roofs, walls, hot water pipes and geysers. Here are the three most useful applications:

Thermal Insulation for Ceilings

When ISOTHERM is used as a thermal insulation for roofs it saves a lot of energy and on top of this is maintenance free. It will help to keep your home cool in summer and warm in winter, saving on heating and cooling costs. ISOTHERM, as well as being safe to install is also very easy to install as it comes in rolls of 750mm and 1200mm wide rolls; perfect for normal housing construction. Installing ISOTHERM thermal insulation for ceilings is extremely easy if you follow these easy steps taken from the official

ISOTHERM website:

• Measure the distance between the roof beams or trusses and select the right roll of Isotherm.
• Cut the ISOTHERM to the correct size before entering the roof space with industrial scissors or shears.
• Make sure you only walk on the crossbeams and balancing boards and not on the ceiling boards.
• Position the ISOTHERM correctly above and in close contact with the ceiling ensuring it fits snugly between the roof beams and trusses.
• Ensure continuous insulation by carefully butting the ends of the rolls together or overlapping them. check more information from http://www.sys-con.com/node/3267403
• Make sure you allow a 150mm gap around flue pipes, ceiling fans and recessed lights.
• Wrap ISOTHERM around geysers and water pipes to increasing energy saving efficiency.
• Don’t block ventilation points with insulation.
• Use any off-cuts to fill in gaps, crevices and corners.
• Don’t put ISOTHERM in direct contact with metal chimney fabrications or flues.
• Don’t forget to insulate under the geyser and above the trap door.

Thermal Insulation for Walls

The reasons for using ISOTHERM in your walls are the same as why you would use it as thermal insulation for roofs. Just like with your roof, installing insulation in your walls will help to keep your home cool in summer and warm in winter helping to reduce energy costs. When it comes to walls ISOTHERM is designed for hollow walls such as interior dry walls, timber walls, and steel frame walls. When installing in these hollow walls you don’t have to worry about ISOTHERM sagging as it is specifically designed not to. Installation of ISOTHERM in walls is very much the same as when installing it in your ceiling with one extra point to remember; be sure to position the ISOTHERM behind conduits, cables and plug points so that they remain exposed.visit this link for more details.

Roofing Sheets

Geyser Blanket

Another great use for ISOTHERM is as a great geyser blanket. By keeping your geyser insulated, the water won’t have to be reheated constantly meaning you will use less electricity. Geysers can account for a large portion of your electricity bill so it’s a good idea to reduce this with insulation. By installing ISOTHERM around your geyser and pipes you can save yourself money.
ISOTHERM has many uses from thermal insulation and walls to helping make your geyser more energy efficient. As well as saving you money it also helps to save the environment making this thermal insulation for ceilings a great choice for any home, whatever your specific needs may be. more ISOTHERM FACTS

Tags: , ,

What to Consider When Buying Vintage Crystal Door Knobs

Posted by Petdoor 4less on November 13, 2014
Doors and Home Improvement / No Comments
Vintage Crystal Door Knob

Crystal door knobs date back as early as the 1800s, when molten glass was first pressed into door knob molds. They became very popular in the United States after World War I. Cast iron, bronze and brass door knobs were in short supply because all kinds of metal was needed for ammunition and airplanes back then. Since there wasn’t a shortage of sand, door knobs were made from glass or crystal. By 1920, all of the biggest hardware makers started mass-producing all kinds of these door knobs.read more related information at http://www.petdoor-4less.com/changing-to-glass-door-knobs/

In that time, most crystal door knobs were clear and usually had six to twelve facets. The faces of the knobs were mostly flat so a person could look inside and see pin-prick, bullet, and star designs that were molded at their bases. The less common types were ones that had color like cobalt and robin’s egg blues, red, violet, amber, emerald, and white milk. You can still find all kinds of various shapes and not just round ones.

One popular Art Deco style knob had tiny bubbles inside them and many people today like to use them when they decorate the interior of their homes with that sleek look. The trend of crystal door knobs carried on through the 1940s, but it started to slow down by the 1950s. Architectural tastes had changed by then, and Americans began to like more modern lines.

Ninety or so years ago, crystal glass door knobs were standard in many new homes. Today, they are very sought after and people try to find them at flea markets, salvage yards and garage sales. Back then these knobs were made to last because they had brass or steel shanks. Today, many knobs have cheap metal alloy and some even have plastic parts. Their enduring design, craftsmanship, design, and their ability to work with most modern locksets, have certainly earned them an excellent reputation today.

Anytime you want to replace just a single door knob in a set, it’s a good idea to bring it’s mate along. Since there are so many knob patterns to select from you may get confused. You also need to bring along the spindle because knobs that were made after 1900 had their threads inside the shank. You need to make sure to correctly fit the spindle to the door knob prior to buying it because setscrews and thread sizes can really vary.

Vintage Crystal Door Knob

Antique or vintage crystal door knobs come in a wide range of prices. Most of the time, the price is based on rarity, condition, color and style. The most common ones are the twelve-sided types and you can anticipate paying about $30 to $50 per set. Eight-sided door knobs can cost anywhere from $60 to $100. Some hand cut-crystal balls get much higher prices, up to $500 per pair.see more reviews for more information.

The most valuable knobs are the cobalt blue and red ones. These fine door knobs were most often used in Victorian mansions for parlor and dining rooms, where guests were entertained. Crystal door knobs have that wonderful “Old World” feeling to them and they add that perfect touch to rooms that have antique furniture.

Tags: , , , ,

Old World Flair with Disinfection Why Use a Copper Door Knob?

Posted by Petdoor 4less on November 13, 2014
Doors and Home Improvement / No Comments
Copper Plate and Lock

Choosing doors are as important as choosing wall paper for your home. It would not be quite enough to choose the best door and buy a cheap and common door knob. The reason behind this is that you would have to replace that perfect door soon enough if you keep hinging and unhinging it because you had to replace the door knob because you keep getting locked in because it’s broken.

As for most classical door knob finishes, it is best to use a copper door knob since it is, for one, going to add flavor in whatever door you choose to use. It can also be the accent color of your entrance door or it could blend with the maple door that you have chosen for your bedroom.

A copper door knob does favor a more classical tone in your home. It adds a bit of a history into the bigger picture. Most keyed cylinders that are made out of copper would look like they have been around for a long time since most designs are more ornate than their contemporary.
The golden flair of a copper door knob would add the sense of majesty that you need in an otherwise simple home. If you only have a few doors to spare then it is best to go with quality copper door knobs.

As an added bonus, a copper door knob would help in the spread on infections and bacteria in your home. If you are health conscious then this kind of finish is best for you. If you can have one that is made out of copper entirely then it is best. If there is anything that gets to cling to your copper door knob, those bacteria would die within eight hours.
If these are not enough reasons to consider this kind of door knob, then what else is?

If you want your house to be as grandiose or as beautiful as it can be, you also need to consider even the smallest of details. But for the people making your home, they would take more pride in their work if they can install a Baldwin door knob in every door of your home.
The quality that comes with a Baldwin door knob spans decades, well into the 40s. As they brought innovation into door knobs with their brass knobs during that time, so do they bring modern flair with contemporary designs and finish for today’s more minimalist home owner.check more door knobs from http://www.factorydirecthardware.com/copper-creek/

From their classic knobs to their couture door knobs, the Baldwin door knob does not disappoint. Their goal is to bring you the kind of door knob that would last for as long as you want them to. They want you to change it only because of whim or because you plan to redecorate not because it is busted.

The crystal door knobs are perfect for interior doors that would lead into your bedroom or your guestrooms. If you are looking for variety in shape, the kind that would daintily fit into your hand, then choosing the oval shaped Baldwin door knob would be best.

Copper Plate and Lock

Taking into consideration the need to have a more modern flair in your home, then finishes that differ from the traditional brass is taken into consideration. Choosing from the silver finishes would allow you to choose something that would blend with your modern but be uniquely Baldwin.choose more from this link.

After all the beauty of the grand painting are in the tiny dots that make up the whole. It is best to have a Baldwin in your home, opening it to your friends and your family.

Tags: , , ,